B. TX.RZ.02 NC Electrode Noumenon Automatic Machining line

Description:
. TX.RZ.02 NC Electrode Noumenon Automatic Machining line


1. Structural composition  
This automatic machining line is composed of the following tools: TX-19 Type NC Electrode Double-end Boring and Sharpening Machine Tool, TX-31 Type NC Electrode Four-cutter Ex-circle Lathe, TX-32 Type NC Electrode Double Thread Carding Machine Tool, CG-30 Type Pensile Automatic  Conveyor and so on, And they complete separately drilling, boring &sharpening, ex-circle turning, thread carding and end-surface precise sharpening as well as the automatic conveying in processing. Moreover,   




According to the demand of customers, the automatic machining line may added with CG-30 Type Baiting Alignment Machine and CG-33 Type Detecting Machine, Separately completing electrode aligning, electrical weighing, specific resistance measuring and data printing and so on.

2. Technical description

The automatic machining line is new-type whole numeric control one and whole process use NC manufacture. Especially, Thread carding process eliminates the error caused by mechanical driving chain. Thread pitch and taper is made by numeric control machine. Numeric control feed can make fine adjustment on size of thread diameter, and processing precision accuracy meet with that of American and Japanese standards.

The technology of the automatic machining line is preceding. The machining line can be controlled either by each separate machine tool or by the connection line.  Each separate machine tool adopts high efficiency NC system and software made by us to make adjustment or trail machining. The connected line is controlled by PLC system made by Schneider Corporation of France and the system made by us, realizing moving together, Therefore, Both automatic extent and efficiency are very high, Machine may work normally without worker monitoring. Leading track adopts the SHS rolling in line track of heavy type made by Japanese THK, so it may be used f

Price Terms :	FOB